The pressed sleeve coupler from Altrad Generation provides a strong external connection for extending scaffold tube runs in standards, ledgers, and transoms. The sleeve clamps around both tube bodies at the join point for a more robust connection than an internal joint pin in loaded scaffold positions.
Available from Altrad Generation as part of the scaffold fittings range, pressed sleeve couplers work alongside pressed joint pins, pressed steel double couplers, and scaffold tube for complete scaffold solutions.
Pressed Sleeve Coupler Key Features
External sleeve design clamps around both tube bodies for a strong extension connection
Provides greater connection strength than internal joint pins for loaded positions
Fits 3.2mm scaffold tube and 4.0mm scaffold tube
Suitable for tube extension joints in standards, ledgers, and transoms
Economical pressed steel construction for budget-conscious scaffold builds
Complete Tube Extension System
Altrad Generation supplies both pressed sleeve couplers and pressed joint pins for all tube extension requirements. Pair them with pressed steel double couplers and the full scaffold fittings range for a complete pressed steel scaffold fitting solution.
Frequently Asked Questions
Q. What is a pressed sleeve coupler used for?
A. A pressed sleeve coupler connects two scaffold tubes end-to-end to extend a standard, ledger, or transom beyond the available single tube length. The sleeve clamps around the outside of both tubes at the join point, providing a stronger external connection than an internal joint pin.
Q. How does a pressed sleeve coupler differ from a drop forged sleeve?
A. A pressed sleeve coupler is formed from pressed sheet steel and provides an economical tube extension fitting for lighter duty applications. A drop forged sleeve is manufactured from forged steel with higher strength and load ratings for primary structural tube extensions. Your scaffold design specifies which type is required.
Q. What tube diameter does the pressed sleeve coupler fit?
A. Altrad Generation pressed sleeve couplers are designed for 3.2mm and 4.0mm scaffold tube and clamp around the outside of both tubes at the extension joint.
Q. Can a pressed sleeve coupler replace a joint pin?
A. A pressed sleeve coupler provides a stronger external connection than a pressed joint pin for tube extensions. It is the preferred fitting for tube extension positions in loaded scaffold structures. For the fastest fit in lightly loaded secondary positions, a joint pin provides an alternative. Always follow your scaffold design specification.
Q. Are pressed sleeve couplers compliant with UK scaffolding standards?
A. Altrad Generation pressed sleeve couplers are manufactured to relevant British Standards for scaffold fittings. They are suitable for tube extension applications within their rated load capacity. Contact your local branch for current compliance documentation.
Get in Touch with Us
Contact your local Altrad Generation branch to discuss pressed sleeve couplers and scaffold fittings, or find your nearest branch using our branch locator.
Download brochure
