5 items
skyTRAX is a lightweight overhead gantry rail designed to move materials safely and efficiently across site areas. It gives you a smooth, controlled track for moving loads of up to 1 tonne safe working load (SWL) at 3m support centres.
What it is used for
skyTRAX hangs from the structure above and connects directly to roof systems and scaffold structures. Custom designed hanging brackets and scaffold couplers make the connection. The modular layout lets you adjust spans to suit different site widths and layouts, with minimal impact on the roof structure and its loading. The system is designed for rapid assembly and dismantling.
How it is built
The rail sections use high strength aluminium, which makes the system easy to handle, transport and assemble on site. The aluminium has a black anodised finish. The beams, hangers and spigots need no maintenance.
What is in the system
Rail sections. Modular aluminium beams that you configure to suit your span.
Beam spigots. Secured with hex bolts and nuts, these make the joints between rail sections.
Hanging brackets. Custom designed to connect the rail to roof systems and scaffold structures.
End pieces. Each one has an integrated spigot and gives the runway a fixed end.
Beam trolley. The 1 tonne trolley has integrated sealed roller bearings and a D shackle at the bottom for attaching loads.
The skyTRAX beam and trolley system does not include lifting machinery, so you can choose the equipment that suits each job.
Using skyTRAX safely
skyTRAX is designed for vertical lifting only. You must not use it to drag, pull or swing loads, and nobody may ride on it or hang from it. Every beam carries a SWL plate marked 1000kg. Never exceed the SWL marked on the runway - the safe working load of the runway will be dependent on the capacity of the supporting structure, it may be downgraded from 1 tonne as appropriate.
The skyTRAX system is subject to the requirements of the Lifting Operations and Lifting Equipment Regulations (LOLER) 1998 and must be thoroughly examined, tested and maintained in accordance with applicable legislation and industry standards, including BS 2853:2011 and BS EN 16851:2017+A1:2020.
To talk through your project, contact your nearest Altrad Hire & Sales branch.
Select the variant you wish to add then change the value and click add to quote:
Select the variant you wish to add then change the value and click add to quote:
Select the variant you wish to add then change the value and click add to quote:
Select the variant you wish to add then change the value and click add to quote:
Select the variant you wish to add then change the value and click add to quote: