View Cart View Cart

Change site

IRL GB
Genlok

Genlok

Components

View all
6 Ton Standard Base Jack

6 Ton Standard Base Jack

1 size available

6 Ton Standard Base Jack added to quote

View
Genlok Standards

Genlok Standards

3 sizes available

Genlok Standards added to quote

View
Horizontal Ledger

Horizontal Ledger

7 sizes available

Horizontal Ledger added to quote

View
Swivel Face Brace

Swivel Face Brace

4 sizes available

Swivel Face Brace added to quote

View
OMEGA Transom

OMEGA Transom

4 sizes available

OMEGA Transom added to quote

View
OMEGA HD Transom

OMEGA HD Transom

1 size available

OMEGA HD Transom added to quote

View
6 Ton Standard Base Jack

Quick Add

6 Ton Standard Base Jack

Select the variant you wish to add then change the value and click add to quote:

Genlok Standards

Quick Add

Genlok Standards

Select the variant you wish to add then change the value and click add to quote:

Horizontal Ledger

Quick Add

Horizontal Ledger

Select the variant you wish to add then change the value and click add to quote:

Swivel Face Brace

Quick Add

Swivel Face Brace

Select the variant you wish to add then change the value and click add to quote:

OMEGA Transom

Quick Add

OMEGA Transom

Select the variant you wish to add then change the value and click add to quote:

OMEGA HD Transom

Quick Add

OMEGA HD Transom

Select the variant you wish to add then change the value and click add to quote:

A bit about Genlok

Genlok is a versatile Modular System Scaffold for all access needs. Fully Galvanised for appearance and performance the system is easily erected to provide a safe efficient working platform with clear working lifts and full handrail.

The key to the system is the 360°node point which can lock up to four components in one easy hammer blow. Node points are spaced on all standards at 500mm intervals to ensure that correct working lifts can be provided and handrails are positioned at the correct height.

The System has a full range of standards and ledger sizes to meet all requirements and can be used with standard 38mm Scaffold boards or alternatively with System Battens using the Omega components.

For full flexibility, Genlock can be supplied with additional inside boards. One inside board gives a full six-board wide platform. Two board and three board platforms using hop-up brackets can be supplied in both regularly supported boards and the Omega Batten System for additional working platforms.

Genlock is totally versatile, the 360°node point allowing ledgers and bracing to be located at one level. Genlock is ideal for circular applications allowing the ledgers to be rotated around the pocket. Additional components can be supplied to create Staircases, Loading Towers, Mobile Towers and Birdcage scaffolds.

Genlok System Scaffold supplied by Generation UK Ltd has been audited by the NASC and has met the criteria to satisfy the NASC Code of Practice for proprietary System Scaffold Systems.

Genlok has met or exceeded the criteria for Quality, Technical Specification and Compliance with EN 12810 and EN 12811 2004.

Contact our specialists

Area Covered: Birmingham North

Area Covered: Birmingham West

Area Covered: Bournemouth

Dominic Sheppard

01202 591255

[email protected]

Area Covered: Brigg

Area Covered: Bristol East

Area Covered: Cardiff

Area Covered: Cardiff Docks

Area Covered: Chelmsford

Area Covered: Chichester

Area Covered: Croydon

Jason Varkevisser

0208 6896044

[email protected]

Area Covered: Dundee

Area Covered: Edinburgh East

Laurence McTernan

0131 552 7534

[email protected]

Area Covered: Edinburgh West

Area Covered: Glasgow East

Area Covered: Glasgow South

Area Covered: Grays

Area Covered: Kings Lynn

Area Covered: Leeds South East

Area Covered: Light Access

Area Covered: London East / South Ockendon

Area Covered: London West

Area Covered: Luton

Area Covered: Manchester

Area Covered: Newcastle

Kevin Philliskirk

0191 492 1190

[email protected]

Area Covered: Northampton

Area Covered: Norwich

Area Covered: Nottingham

Area Covered: Peterborough

Area Covered: Reading

Area Covered: Rotherham

Area Covered: Truro

Area Covered: Widnes

Loading Platform

Loading Platform

Genlok can be used to create loading towers for the purpose of distribution of palletised materials to the working level by site forklift or loader. The towers can be built progressively with the working lift to match the bricklayer’s progress or with a loading platform at every other lift. Only one platform may be loaded at any time.

Made from a square 2.5m bay and constructed using 1.5m or 2m lifts tied to the main structure at every leg and every lift. Platforms may be overboarded to cover all gaps and allow wheels or skates to be used. Loading towers and their loading platforms must be strengthened, stabilised and safe to operate. The correct use of additional components and erection guidance are detailed below.

Our use of cookies

Some cookies are necessary for us to manage how our website behaves while other optional, or non-necessary, cookies help us to analyse website usage. You can Accept All or Reject All optional cookies or control individual cookie types below.

You can read more in our Cookie Notice

Functional

These cookies enable core functionality such as security, network management, and accessibility. You may disable these by changing your browser settings, but this may affect how the website functions.

Analytics cookies

Analytical cookies help us to improve our website by collecting and reporting information on its usage.

Site Choice
Please select preferred site